|
Easy Installation |
 |
You'll appreciate the ease of installation and the
distinguished straight ridge look of quality from the day of
installation and for many years to come. |
|
|
|
Cut opening 1-3/4" each of
Ridge Centerline.
Allow vent to extend at least 6"
beyond ends of vent opening in roof.
Place vent in position, centered on
roof opening.
Wind deflector optional,recommend use in high wind areas.
Position wind deflector;
Tack wind deflector to the deck with
1" to 1-1/4" roofing nails.
Screw vent to roof deck with 3" corrosion resistant deck screws,
placed at each spacer block or use spike gun with 2 1/2" screw nail or longer (every 16" OC).
Place a 10" wide strip of 30lb felt centered on the Ridge Vent
and tack in position.
Apply shingles centered on the Ridge Vent use (1" to 1 1/4") roofing
nails placed at the nail line for each shingle. Allow the vent
shingles to over hang the vent a minimum of 3/4" on each side.
If wind deflectors are installed, apply a continuous 1/4" bead of
asphalt roof cement where the deflector contacts the shingles.
|
|
|
|
Here's How It Works |
|
|
In older homes as well as new ones, proper air ventilation is crucial; otherwise your home will deteriorate gradually from the inside out. WRV used in conjunction with adequate soffit vents helps to ventilate your house in a natural and efficient way.
In the summer months poor ventilation will lead to moisture and heat build up trapped in the attic, which will ruin your beautiful home.
In the winter months, your house needs good ventilation to prevent water from backing up, forming ice dams at the eaves. This eventually can lead to water creeping up through the roof and down inside your home. |
|
|
|
Easy To Ship |
|
|
|
Our WRV can be stacked up to 6 pallets high and shipped with ease. |
|
|
Pallet size is 4'x8'x23" high. |
|
|
|
